2014 BMW 3 Series

Canadian MSRP
$35,990 - $58,300
2014 BMW 3 Series

Key Specifications for 2014 BMW 3 Series

Fuel Economy 4.5 - 10.5 City/HWY combined
Horsepower 180 - 335 hp
Drivetrain Rear-Wheel Drive, All-Wheel Drive
Engine Gasoline, Diesel, Hybrid
Torque 200 - 330 ft-lb
Seats 5
 

Review & Compare:
2014 BMW 3 Series Trims

The 2014 BMW 3 Series has 12 trims. Below you will be able to review all the trims with the option to compare.
12 trims available
Select 1 more trim

Photos

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

View All Articles

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2021-469
Recall date
2021-07-29
System affected
Fuel Supply
Model year(s) affected
2014 2015 2016 2017 2018
Manufacturer Recall Number:
13 80 21RC
Units Affected:
3,481
Notification Type:
Safety Mfr
Issue: On certain vehicles equipped with a diesel engine, the high-pressure fuel pump may wear prematurely. This can cause reduced engine performance and could lead to a sudden engine stall. Note: A warning lamp on the instrument cluster will turn on if the fuel pressure drops. Safety Risk: A loss of engine power could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to replace the high-pressure fuel pump.
Recall number
2021-093
Recall date
2021-02-24
System affected
Steering
Model year(s) affected
2012 2013 2014 2015
Manufacturer Recall Number:
32 81 21RC
Units Affected:
1,519
Notification Type:
Safety TC
Issue: On certain vehicles, the bolts that attach the electric power steering assist motor to the steering gear may corrode and break. This could cause a loss of power steering assist. Safety Risk: A loss of power steering assist may result in a sudden increase in steering effort, especially at low vehicle speeds. This could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to replace the bolts and apply a wax sealer. If one or more of the bolts are broken or missing, a new steering gear will be installed.
Recall number
2020-127
Recall date
2020-03-25
System affected
Powertrain
Model year(s) affected
2014 2015
Manufacturer Recall Number:
27 80 20RC
Units Affected:
1,798
Notification Type:
Safety Mfr
Issue: On certain 328d xDrive models, engine vibrations could damage the rear driveshaft joint. Over time, this could cause the driveshaft to separate, which would result in a loss of power to the rear wheels. If the driveshaft separates, the vehicle could also move when the transmission is in Park, and the parking brake is not used. Safety Risk: A loss of power to the rear wheels could increase the risk of a crash. A parked vehicle that rolls away could also increase the risk of an injury or a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to replace the rear driveshaft constant-velocity joint. Dealers will also inspect the transfer case, and if necessary, replace it. Note: BMW recommends that you should use the parking brake, at all times, when you park the vehicle. This will minimize the risk of the vehicle rolling away.
Recall number
2018-587
Recall date
2018-10-26
System affected
Engine
Model year(s) affected
2013 2014 2015 2016 2017
Manufacturer Recall Number:
Units Affected:
10,368
Notification Type:
Safety Mfr
On certain vehicles, the cooler for Exhaust Gas Recirculation (EGR) module may develop an internal leak and coolant could mix with diesel engine soot/sediment. In rare circumstances, this condition could result in smouldering particles and lead to the melting of the intake manifold, increasing the risk of a fire causing injury and/or damage to property. Correction: Dealers will inspect the EGR cooler, and if necessary, replace it. If it is determined that the EGR cooler has leaked internally, the intake manifold will also be replaced. The EGR pipe connecting the cooler to the manifold will be cleaned. Note: An operator may be alerted to this condition by one or more of the following symptoms: A warning symbol in the instrument cluster displaying a loss of engine coolant, a reduction in engine power, an unpleasant odour (exhaust gas), an unusual noise from the engine compartment, and/or smoke from the engine compartment.
Recall number
2015-369
Recall date
2015-08-14
System affected
Lights And Instruments
Model year(s) affected
2012 2013 2014 2015
Manufacturer Recall Number:
Units Affected:
637
Notification Type:
Compliance Mfr
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard 108 - Lighting System and Retroreflective Devices. The front side markers may be inoperative due to a vehicle software update. This could result in the front side marker lamps not illuminating in conjunction with the parking lamps or headlamps, and no warning message would be displayed in the instrument cluster. The turn signal function of the front side marker lamps would remain operational. This could cause the vehicle to fail to comply with the requirements of the standard, and reduce vehicle conspicuity, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will update vehicle software.
Recall number
2015-343
Recall date
2015-07-30
System affected
Electrical
Model year(s) affected
2014 2015
Manufacturer Recall Number:
Units Affected:
2,966
Notification Type:
Safety Mfr
Certain vehicles, which were parked at the port of entry in Halifax during the ice storms in February 2015, may have been exposed to excessive standing water and salt for an extended period due to this isolated environmental incident. Certain MINI models could have corrosion at the starter motor power supply cable connectors, which could lead to the inability to restart the engine following an engine shutdown by the start-stop (MSA) system, increasing the risk of crash causing injury in a traffic situation. On certain BMW models, the lubrication of some internal components within the steering rack may have been exposed to excessive water or salt which could result in higher than normal steering effort or steering binding, increasing the risk of a crash causing injury and/or damage to property. In addition, electrical wires and/or connectors in all affected vehicles may have been exposed to water or salt, which could lead to increased electrical system resistance, and increase the risk of fire causing injury and/or damage to property. Correction: Owners should contact their selling Retailer regarding this recall. Affected vehicles will be inspected. Some vehicles will be taken out of service immediately and owners will be provided with temporary transportation until a new replacement vehicle is available. All other vehicles are cleared of this safety concern and may continue to be driven until a new replacement vehicle is available. Due to potential concerns about long term vehicle quality, all affected vehicles will ultimately be removed from service.
Recall number
2015-136
Recall date
2015-03-27
System affected
Fuel Supply
Model year(s) affected
2013 2014
Manufacturer Recall Number:
Units Affected:
1,620
Notification Type:
Safety Mfr
On certain vehicles, improper nickel plating of certain fuel pump internal components could contaminate the pump, potentially resulting in an inoperative fuel pump. This could result in a no-start condition, or an engine stall without warning and without the ability to restart the vehicle, which could increase the risk of a crash. Correction: Dealers will replace the fuel pump.
Recall number
2014-435
Recall date
2014-10-03
System affected
Powertrain
Model year(s) affected
2012 2013 2014
Manufacturer Recall Number:
Units Affected:
1,279
Notification Type:
Safety TC
On certain vehicles, a defect in manufacturing could result in a loss of oil supply to the vacuum pump. If this were to occur, the vacuum pump could fail, causing a loss of power assist to the braking system. This could cause increased stopping distances, possibly resulting in a crash causing injury and/or damage to property. Correction: Dealers will install a camshaft seal disk locking ring. Note: This is an expansion of recall 2013-330.
Recall number
2013-330
Recall date
2013-09-27
System affected
Brakes
Model year(s) affected
2013 2014
Manufacturer Recall Number:
Units Affected:
9,406
Notification Type:
Safety TC
On certain vehicles, a defect in manufacturing could result in a loss of oil supply to the vacuum pump. If this were to occur, the vacuum pump could fail, causing a loss of power assist to the braking system. This could cause increased stopping distances, possibly resulting in a crash causing injury and/or damage to property. Correction: Dealers will install a camshaft seal disk locking ring.

Similar Vehicles

Select Another Vehicle
Search now